Turbine Hall Fire Detection and Suppression System
LONDONENERGY LTD
- Value
- £238,248
- Currency
- GBP
- Region
- London
- Category
- Security & Defence
- Procedure / notice type
- award,contract
- Published
- 16 Nov 2026
- Closing date
- Not stated
Get free alerts for contracts like this
Overview
The contractor shall provide a complete engineered fire detection and suppression system, including all labour, materials, plant, access equipment, design services, testing equipment, certification and documentation necessary to deliver a fully operational system. The protected scope comprises four individual turbine areas within the Turbine Hall. For tendering purposes, each turbine shall be assumed to have an approximate protected area of 15 m², giving an indicative total protected turbine area of approximately 60 m². Tenderers shall verify all dimensions, access constraints, hazard locations and coverage requirements during the site survey and shall base the final design on confirmed site measurements and risk assessment. • Site surveys and risk assessment of the Turbine Hall and protected turbine assets. • Design of the fire detection, alarm interface and suppression system. • Selection and supply of detectors, control panels, suppression equipment, pipework, nozzles, cylinders, pumps, valves, cabling, containment, signage and ancillary equipment. • Installation of all system components, including interfaces with existing fire alarm, plant control, shutdown, ventilation or building management systems where required. • Factory acceptance testing, site acceptance testing, commissioning and functional performance testing. • Provision of certification, operation and maintenance manuals, as-built drawings, cause-and-effect documentation and training. • Provision of warranty, defects support and proposals for ongoing inspection, testing and maintenance. 4. Regulatory and Standards Compliance The system and all works shall comply with all applicable UK legislation, regulations, approved guidance and recognised standards current at the date of tender and installation. The contractor shall identify and declare all applicable standards within their tender submission and shall state any proposed deviations. • Regulatory Reform (Fire Safety) Order 2005 and the duties of the Responsible Person. • BS 5839-1 for fire detection and fire alarm systems in non-domestic premises, including design, installation, commissioning and maintenance requirements. • Applicable BS EN 54 standards for fire detection and alarm components. • Applicable standards for the selected suppression technology, which may include BS EN 15004 for gaseous extinguishing systems, BS 8489 for industrial and commercial watermist systems, BS EN 12845 for sprinkler systems, or other relevant recognised standards appropriate to the proposed solution. • Where water mist is proposed, the system shall comply with BS 8489 or another applicable recognised standard for industrial and commercial water mist systems, together with manufacturer approvals, fire test evidence and any insurer requirements relevant to turbine or machinery-space oil-fire protection. • BS 7273 requirements for interfaces between fire detection systems and ancillary fire protection measures, where applicable. • Health and Safety at Work etc. Act 1974, CDM Regulations 2015, Electricity at Work Regulations 1989 and all applicable site safety requirements. • Manufacturer installation instructions, insurer requirements and industry best practice. 5. Technical Requirements 5.1 Fire Risk Basis The principal fire risk within the protected turbine areas arises from steam pipework operating at conditions and temperatures above the flash point of the oil used within the turbine systems. Oil pipework and steam pipework run adjacent to one another, increasing the likelihood that an oil leak, spray, mist or release could come into contact with hot steam pipework or other high-temperature surfaces and ignite. The fire detection and suppression design shall therefore be based on credible oil-release scenarios, including pressurised leakage, dripping, pooling, spray impingement, atomised mist and contact with hot pipework or adjacent hot surfaces. Tenderers shall explain how their proposed solution detects and suppresses fi
Looking for work in this area? Create a free worker profile
Contract information is aggregated from public sources under the Open Government Licence and may be incomplete or out of date. Always verify details against the official published notice before bidding.
More on this contract
Plain English summary
Who won last time
Renewal date
Write my bid
£1 for your first 7 days, then £89 a month. Cancel anytime.
The full price starts on 29 November 2026.
Bid Pack for this contract
Get Bid Pack (£349)
An auto-generated draft bid document for this notice: a response to the stated requirements, a Social Value statement, a Modern Slavery policy statement, and an SQ-style company overview.
This is a strong starting draft, generated automatically from your inputs and the published notice. It is not a guaranteed winning submission. You are responsible for reviewing, finalising, and checking it against the buyer's full requirements before you submit.
One-off payment. Your draft is generated as soon as your payment is confirmed.
An automated first draft, not a guaranteed win. You are responsible for reviewing and finalising it.
Similar open contracts
- Provision of Safety Showers & Eyebaths
Scottish Water · Scotland · Closes 22 Dec 2026
- UK4 - 715960471 - The Provision of Security Screening for HMP Dhekelia
Ministry of Defence · UK wide · Closes 14 Dec 2026
- ID 6841219 - DFC - NMNI - The Provision, Support and Maintenance of a Key Management System
National Museums Northern Ireland (NMNI) · Northern Ireland · Closes 8 Dec 2026
- Carbine and Self-loading Pistol (SLP) Non-Lethal Training Munitions
Civil Nuclear Police Authority (CNPA) / Civil Nuclear Constabulary (CNC) · UK wide · Closes 24 Nov 2026
- The Supply of Thermal Jackets & Trousers Multi Terrain Pattern (MTP)
LEIDOS SUPPLY, LIMITED · UK wide · Closes 8 Dec 2026
- Supply of SAPU Target Systems
UNITE PROCUREMENT UK LIMITED · UK wide · Closes 24 Nov 2026
Original government notice
Sign up or log in to view the original government notice.
Contains public sector information licensed under the Open Government Licence v3.0. 123 Tenders is not affiliated with, endorsed by, or acting on behalf of any buyer organisation named in these notices, and gives no guarantee as to accuracy or outcome.
